Custom made lamp

Let us create your custom-build table lamp with the fabric of your choice!
For more information on these light fixtures, please read the "More info" and "Data sheet" sections below.

More details

By buying this product you can collect up to 8 loyalty points. Your cart will total 8 points that can be converted into a voucher of 8,00 €.

40,00 €

Data sheet

Country of originDesigned in France and made in France by Tante Ines
MaterialShade : Fabric / Frame : Steel, Epoxy powder coating
ShippingOur custom made lighting fixtures are delivered to the carrier between three and ten business days
StandardsMeets CE standards
Recommended usageAccording your fabric
Dominant colorAccording your fabric
Satisfaction or your money backNo money back services for our custom made lighting fixtures

More info

How order your custom made lamp?

Step 1Choose the height and diameter of your future custom lamp
Step 2Note the dimensions of fabric needed depending on the size selected
Diameter of the lampMinimum width of fabricMinimum height of fabric
10 cm (3.94 in.)37 cm (14.57 in.)

For height, add 5 cm (2 in.) to the height of the lamp

Example: for a lamp with a height of 40 cm (15.75 in.), your fabric should have a minimum height of 45 cm (17.75 in.)

12 cm (4.72 in.)43 cm (16.93 in.)
15 cm (5.90 in.)53 cm (20.87 in.)
20 cm (7.87 in.)68 cm (26.77 in.)
25 cm (9.84 in.)86 cm (33.86 in.)
The table above shows the minimum dimensions, but you can send us a fabric whose dimensions are larger, we take care to cut off your fabric.
Step 3Add the lamp to cart and place an order
You can pay by credit card, PayPal or bank transfer
Step 4Send us your fabric
We will provide you the address to send the fabric after confirmation of your payment.
On our side, we will notify you by email of the various stages of your custom lamp (receipt of your fabric, fabrication, shipment, etc.) and we will provide the tracking number allowing you to track your custom made lamp.

Our recommendations for your custom made lamp

Fabric type

Please chose smooth fabrics and thin cottons as the weft of the fabric could be transparent when the lamp is turned on.

We do not take silk fabrics.

Patterned fabricsIf you want that the pattern is centered in height, consider the 2.5 cm fabric top and bottom necessary.
Meaning of fabricBe vigilant about the meaning of your fabric, if the reasons must be vertical, they are in the height direction. If the reasons must be horizontal, they will be in the width direction.
Your details

You can tell us more details on your application in the "Product customization" section at the bottom of this page or when sending your fabric or by email.

Still have questions? Do not hesitate to contact us at or via our contact form.

Custom made lamp - Product information

DiameterAt your convenience, between 10 and 25 cm
HeightAt your convenience, between 25 and 80 cm
Cord set

Furnished (including E26/E27 bulb socket, white inline cord set and light switch).

According to your country, we furnish you the right plug (2 pins Euro-plug, 2 pins US-plug or 3 pins UK-plug). Please click here for more information.

Bulb lightNot furnished - E26 or E27 light bulb is required according the voltage you use (120 or 240 V)

Light bulbs - Our recommandations

Be sure you have 2-3 inch separation from bulb to shade, especially for higher wattage bulbs.

Our floor and table lamps need E26 ou E27 light bulb according to the voltage of your country (120 or 240 V).

E26 stands for 26 mm and the E27 for 27 mm in diameter. Those two standards are interchangeable, meaning a E26 light bulb will fit a European E27 base (bulb socket), and E27 light bulb will fit in a E26 base (bulb socket). 

Our light fixtures in your country

Our floor and table lamps are compliant for all countries in the world (except Australia, Brazil and South of Africa). According to your country, we furnish you the right plug (2 pins Euro-plug, 2 pins US-plug or 3 pins UK-plug). Please click here for more information.

In the same, our shades can be used all over the world. If necessary, you can purchase an Uno Adapter to fasten our shades on your lamp bases.


Write a review

Custom made lamp

Custom made lamp

Let us create your custom-build table lamp with the fabric of your choice!
For more information on these light fixtures, please read the "More info" and "Data sheet" sections below.


Product customization

After saving your customized product, remember to add it to your cart.
Allowed file formats are: GIF, JPG, PNG



* required fields