Custom made lamp
|Let us create your custom-build table lamp with the fabric of your choice!|
|For more information on these light fixtures, please read the "More info" and "Data sheet" sections below.|
Product customizationDon't forget to save your customization to be able to add to cart
How order your custom made lamp?
|Step 1||Choose the height and diameter of your future custom lamp|
|Step 2||Note the dimensions of fabric needed depending on the size selected|
|Diameter of the lamp||Minimum width of fabric||Minimum height of fabric|
|10 cm (3.94 in.)||37 cm (14.57 in.)||
For height, add 5 cm (2 in.) to the height of the lamp
Example: for a lamp with a height of 40 cm (15.75 in.), your fabric should have a minimum height of 45 cm (17.75 in.)
|12 cm (4.72 in.)||43 cm (16.93 in.)|
|15 cm (5.90 in.)||53 cm (20.87 in.)|
|20 cm (7.87 in.)||68 cm (26.77 in.)|
|25 cm (9.84 in.)||86 cm (33.86 in.)|
|The table above shows the minimum dimensions, but you can send us a fabric whose dimensions are larger, we take care to cut off your fabric.|
|Step 3||Add the lamp to cart and place an order|
|You can pay by credit card, PayPal or bank transfer|
|Step 4||Send us your fabric|
|We will provide you the address to send the fabric after confirmation of your payment.|
|On our side, we will notify you by email of the various stages of your custom lamp (receipt of your fabric, fabrication, shipment, etc.) and we will provide the tracking number allowing you to track your custom made lamp.|
Our recommendations for your custom made lamp
Please chose smooth fabrics and thin cottons as the weft of the fabric could be transparent when the lamp is turned on.
We do not take silk fabrics.
|Patterned fabrics||If you want that the pattern is centered in height, consider the 2.5 cm fabric top and bottom necessary.|
|Meaning of fabric||Be vigilant about the meaning of your fabric, if the reasons must be vertical, they are in the height direction. If the reasons must be horizontal, they will be in the width direction.|
You can tell us more details on your application in the "Product customization" section at the bottom of this page or when sending your fabric or by email.
Still have questions? Do not hesitate to contact us at email@example.com or via our contact form.
Custom made lamp - Product information
|Diameter||At your convenience, between 10 and 25 cm|
|Height||At your convenience, between 25 and 80 cm|
Furnished (including E26/E27 bulb socket, white inline cord set and light switch).
According to your country, we furnish you the right plug (2 pins Euro-plug, 2 pins US-plug or 3 pins UK-plug). Please click here for more information.
|Bulb light||Not furnished - E26 or E27 light bulb is required according the voltage you use (120 or 240 V)|
Light bulbs - Our recommandations
Be sure you have 2-3 inch separation from bulb to shade, especially for higher wattage bulbs.
Our floor and table lamps need E26 ou E27 light bulb according to the voltage of your country (120 or 240 V).
E26 stands for 26 mm and the E27 for 27 mm in diameter. Those two standards are interchangeable, meaning a E26 light bulb will fit a European E27 base (bulb socket), and E27 light bulb will fit in a E26 base (bulb socket).
Our light fixtures in your country
Our floor and table lamps are compliant for all countries in the world (except Australia, Brazil and South of Africa). According to your country, we furnish you the right plug (2 pins Euro-plug, 2 pins US-plug or 3 pins UK-plug). Please click here for more information.
In the same, our shades can be used all over the world. If necessary, you can purchase an Uno Adapter to fasten our shades on your lamp bases.
- Country of origin
- Designed in France and made in France by Tante Ines
- Shade : Fabric / Frame : Steel, Epoxy powder coating
- Our custom made lighting fixtures are delivered to the carrier between three and ten business days
- Meets CE standards
- Recommended usage
- According your fabric
- Dominant color
- According your fabric
- Satisfaction or your money back
- No money back services for our custom made lighting fixtures
All our lights are made in France in our workshop in Mayenne.
The metal and electrical components of our luminaires come from French industry.
We manufacture and send your orders within a week by French post services.
You are not completely satisfied? We take back your order within 14 days.
You might also like